Clock Radio Knobs

Clock Radio Replacement Knobs
(New Old Stock & Reproductions)

As you will see, some clock radio knobs push on, and some are threaded on in either a clockwise (right-hand thread) or counter-clockwise (left-hand thread) direction. Look closely at your radio for either a split shaft or a threaded shaft. The knobs below are arranged from older (1940's and early 50's) at the top, to newer (1950's to 1960's) at the bottom.

Clock Radio Knob Shaft Repair Tips(cr25)

Got a broken shaft that prevents you from putting that missing clock knob in place? Use one of these handy parts to fix that shaft. You'll need to remove the chassis from the cabinet, but before you do, determine how much you should cut off the shaft.

shaft diameter: 1/8"
total length:
long: 1-1/16"
medium: 13/16"
short: 9/16"
socket length: 3/16"

Installation Instructions for Replacment Shaft-Tip on Broken Clock-Radio Knob Shafts
1. Cut off broken ends of old control shaft.
2. Slip socket section of new shaft-tip over old shaft, being careful to align slot of new shaft-tip in proper position so that the knob pointer will point to proper spot.
3. Run a little solder into hole inside of new shaft-tip.
4. Let cool, then install knob on new shaft.

Clock Shaft Repair Part:
$7.00 each

General Electric clock radio knobs. Model 50, 60, and 500 series. Cream color. Large one pushes onto a spline shaft for volume.

Smaller knobs are for the clock. They fit on a split shaft.

large: 5/8" long, 11/16" wide (cr23)
small: 7/16" long, 3/8" wide (cr24)

Large Radio Knob $7.00
Small Clock Knob $5.00

Small, fluted, push-on knob with vane. 3/8 in. long, 7/16 in. wide, 1/8 in. hole.
(cr1)

knob (1) $5.00

Small, fluted, push-on knob with vane. 3/8 in. long, 7/16 in. wide, 1/8 in. hole.
(cr4)

knob (1) $5.00

Small, fluted, push-on knob, with vane. 3/8 in. long, 7/16 in. wide, 1/8 in. hole.
(cr6)

knob (1) $5.00

Reproduction: Small, fluted, push-on knob, with vane. 3/8 in. long, 7/16 in. wide, 1/8 in. hole.
(cr8)

knob (1) $5.00

Reproduction of the knob style above in clear plastic. Buy 3 and eliminate the color match problem. (cr3)

set of 3 knobs $12.00

Small, fluted, threaded knob with no vane. 3/8 in. long, 7/16 in. wide, 1/16 in. hole.
(cr2)

Small, lightly fluted, threaded knob with no vane. 3/8 in. long, 7/16 in. wide, 1/16 in. hole.
(cr5)

knob (1) $5.00

Small, lightly fluted, threaded knob with no vane. 3/8 in. long, 7/16 in. wide, 1/16 in. hole.
(cr7)

knob (1) $5.00

Small, lightly fluted, threaded knob with no vane. 3/8 in. long, 7/16 in. wide, 1/16 in. hole.
(cr9)

knob (1) $5.00

Reproduction of Crosley D25 series (Dashboard) clock knobs. Two with vane and one round. Fine fluting. (cr22cl)

set of 3 knobs $14.00

Reproduction of white Crosley D25 (Dashboard) clock knobs. Two with vane and one round. Fine fluting. (cr22w)

set of 3 knobs $14.00

Reproduction of black Crosley D25 (Dashboard) clock knobs. Two with vane and one round. Fine fluting. (cr22bk)

set of 3 knobs $14.00

Reproduction of Crosley D25 (Dashboard) knob with vane. (cr22whv)

Single white knob (1)
used on the left side
or bottom of clock

$5.00

Reproduction of Crosley D25 (Dashboard) knob with no vane. (cr22whpl)

Single white knob (1)
used on right side of clock

$5.00

Reproduction of Crosley D25 (Dashboard) knob with vane. (cr22bkv)

Single black knob (1)
used on left side
or bottom of clock

$5.00

Reproduction of Crosley D25 (Dashboard) knob with no vane. (cr22bkpl)

Single black knob (1)
used on right side of clock

$5.00

Medium length, smooth, push-on knob with light vane. 5/8 in. long, 7/16 in. wide, 1/8 in. hole.
(cr10)

knob (1) $5.00

Long, smooth, push-on knob with light vane. 3/4 in. long, 7/16 in. wide, 1/8 in. hole.
(cr11)

knob (1) $5.00

Long, smooth, push-on knob with light vane. 3/4 in. long, 7/16 in. wide, 1/8 in. hole.
(cr12)

knob (1) $5.00

Long, cream, smooth, push-on knob with light vane. 3/4 in. long, 7/16 in. wide, 1/8 in. hole. Color matches knob below.(cr21)

knob (1) $5.00

Long, cream, fluted, push-on knob with pronounced vane. 3/4 in. long, 7/16 in. wide, 1/8 in. hole. Color matches knob above.(cr13)

knob (1) $5.00

Long, fluted, push-on knob with pronounced vane. 3/4 in. long, 7/16 in. wide, 1/8 in. hole.
(cr14)

knob (1) $5.00

Long, fluted, push-on knob with pronounced vane. 3/4 in. long, 7/16 in. wide, 1/8 in. hole.
(cr15)

knob (1) $5.00

Crystal, medium length, smooth, push-on knob with no vane. 5/8 in. long, 7/16 in. wide, 1/8 in. hole.
(cr16)

knob (1) $5.00

Crystal, long, fluted, push-on knob with short vane.
1 in. long, 9/16 in. wide, 1/8 in. hole.
(cr20)

knob (1) $5.00

Crystal, long, fluted, push-on knob with long vane. 1 in. long, 7/8 in. wide + 1/2 in. vane, 1/8 in. hole.
(cr17)

knob (1) $5.00

Crystal, long, fluted, push-on knob with long pronounced vane. 1 in. long, 7/8 in. wide, 1/8 in. hole.
(cr18)

knob (1) $5.00

Crystal, long, faceted, push-on knob with short vane and brass bright. Fits G.E., Zenith, Motorola. 1 in. long, 3/4 in. wide, 1/8 in. hole.
(cr19)

knob (1) $5.00

Return to Parts Page

Clock Radio Replacement Knobs (New Old Stock & Reproductions)

Clock Radio Replacement Knobs
(New Old Stock & Reproductions)